.webp){kind=logo}
Triton ULTRA connects directly to Salient CompleteView, combining TCP sensor events with a live RTSP occupancy dashboard. Configured alarms can activate recording on associated cameras, helping staff monitor room activity and review detections with video.
The sensor view provides context inside a restroom or locker room, while nearby cameras show activity outside the entrance. Staff can assess occupancy before entering and use the event timestamp and associated recordings when investigating afterward.
.png)
Triton ULTRA + Salient CompleteView
How it works: CompleteView displays ULTRA’s sensor dashboard through its RTSP/TCP driver and receives sensor event messages over TCP. Alarm actions connect those detections with the cameras selected during setup.
Camera association: Configure Alarm Recording actions for the cameras that cover each sensor’s location. This connects the detection to a recording workflow your staff can review in CompleteView.
Set and Reset messages: Enable both messages as described in the guide. The Reset message clears the active alarm so subsequent events can be processed.
Monitor occupancy before responding
The live RTSP occupancy view can be displayed alongside camera feeds without waiting for an alarm. Operators can use that room context to decide which locations need attention and what staff may encounter when they arrive.
Before you start: Configure the sensor stream, TCP event messages, and Alarm Recording actions. Test an event and its reset, check the associated camera response, and confirm that your recording and retention settings provide the footage needed for incident review.
Frequently Asked Questions
What happens when a sensor alarm is received?
CompleteView can activate Alarm Recording on the cameras associated with that alarm.
How do we choose the camera for a sensor?
Configure the camera association in CompleteView, using a view that covers the hallway or entrance near the sensor.
Can we view occupancy without waiting for an alert?
Add ULTRA’s RTSP occupancy stream as a separate live view alongside your cameras.
Can staff review an incident later?
Use the event timestamp and associated camera recordings, subject to the system’s recording and retention settings.
Why does the setup need Reset messages?
CompleteView needs the alarm-end message to clear the active alarm. Enable both Set and Reset as described in the guide so later events can be processed.
Resources
Salient CompleteView – Triton ULTRA Integration Guide — full setup guide for TCP event configuration and Alarm Recording setup.
Contact us if you're not sure how this fits your setup.
Compare Triton ULTRA integration options across video management, access control, intercoms, and staff alerts.
